DJI Zenmuse Z15 Series Gimbal Connector for Matrice 600 Drones

Item Code: G1056HK
Last updated: 08/06/2023
- For DJI Matrice 600 Drones & Z15 Gimbals
- Connect a Z15 Gimbal to Matrice 600
- Ask a Question
DJI Zenmuse Z15 Series Gimbal Connector for Matrice 600 Drones
Ask a Question
Specification:
Attaching a new gimbal camera to your Matrice 600 is easy when you have the right equipment. This Zenmuse Z15 Series Gimbal Mounting Kit for Matrice 600 Drones from DJI gives you all of the cabling and parts you’ll need to get your drone up and running with a Z15.
In the Box
- Power Connect Cable
- 4-PIN Cable
- 7-PIN Cable
- 4 x Active Locks
- 12 x Dampers
- Assortment of Screws
- Limited 3-Month Warranty
- Above TEK
- ACER
- Amano
- AMAZON
- AORUS
- APC
- APPLE
- ASTRO
- ASUS
- AUTEL ROBOTICS
- AVERMEDIA
- Buffalo
- CAT
- CHIC CROSS
- CISCO
- Crucial
- Cyberpower
- D link
- D-LINK
- DELL
- DJI
- ELECOM
- ENGENIUS
- EZVIZ
- Fasgear
- Fujitsu
- GOOGLE NEST
- HP
- HUAWEI
- INFOSEC
- INTEX
- KINGSTON
- KSTAR
- LENOVO
- Logitech
- Magmo
- MICROLINK
- MICRON
- MICROSOFT
- Misc Brand
- MSI
- OCTACORE
- Other Brand
- PARROT PROFESSIONAL
- Paul & Joe
- PNY
- Razer
- SAMSUNG
- SONY
- SYNOLOGY
- TP Link
- ZKT
Related Products
Item Code: G105600G
Last updated: 25-02-2020
- Covers the propellers.
- Aids flight safety, protecting people and objects from spinning propellers.
- Small, lightweight, easy to mount, and detach.
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G1056HK
Last updated:08/06/2023
- For DJI Matrice 200/210 Drones
- Replacement Landing Gear Bracket
Available on backorder
Item Code: G1056TA
Last updated:06/06/2023
Brand new Gimbal Vibration Absorbing Board (original) for DJI Mavic Pro.
Item Code : G105600GA
Last Updated : 07-06-2023
- DJI Authorized Dealer
- DJI Authorized Enterprise Dealer
- DJI Nationwide Service
Out of stock
Item Code: G1056TA
Last updated: 06/06/2023
- Three-Axis Motorized Gimbal Stabilizer
- Designed for Mirrorless Cameras
- One-Handed Operation, 4.4 lb Max. Load
- Force Mobile Smartphone Control
Item Code: G1056TA
Last updated: 06/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Item Code: G1056TA
Last updated: 06/06/2023
- Just connect your tablet with DJI Go App to DJI Mavic and start shooting as a Pro!
Item Code: G1056TA
Last updated: 06/06/2023
Max 30 mins flight time.
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to distance traveled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in longer term storage, batteries will discharge power to maintain good health.
Item Code: G1056TA
Last updated: 06/06/2023
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series*
Item Code: G1056TA
Last updated: 07/06/2023
- The Zenmuse X5R SSD is a high performance storage device designed for the Zenmuse X5R.