DJI Landing Gear Kit for Matrice 100

- Impact Absorbing Rubber Feet
- Tool-Free Installation
- Set of Four
- 4 Pieces
- Ask a Question
DJI Landing Gear Kit for Matrice 100
Ask a Question
Item Code: G105600G-A
Last updated: 10-08-2020
The Landing Gear Kit for Matrice 100 from DJI features a set of four replacement/upgrade landing gear. Landing pads – or “feet” – are installed at the base of each arm, helping to minimize impact and vibration during landing. Installation it tool-free.
Brand
DJI
Related Products
Item Code: G105600G
Last updated: 25-02-2020
Max 30 mins flight time.
Professional aerial imaging benefits from longer flight times. The Phantom 4 Pro has a maximum flight time of 30 minutes, providing more time in the air to capture the perfect shot. The DJI GO app shows battery lifetime and calculates remaining flight times according to distance traveled and more. It will give alerts when it reaches a minimum safe amount required for a safe journey back to the takeoff point. An advanced battery management system is also in place to prevent overcharging and over draining. When placed in longer term storage, batteries will discharge power to maintain good health.
Item Code: G105600G
Last updated: 25-02-2020
Brand new Gimbal Vibration Absorbing Board (original) for DJI Mavic Pro.
The Zenmuse X5R SSD is a high performance storage device designed for the Zenmuse X5R. It is essential when shooting video in a lossless format.
- Item Code : G105600
- Last Updated : 03-03-2020
-
OverviewPowerful propulsion with a foldable, easy to mount, and durable design.
-
HighlightsFoldable and light.
Push type design allows for quick mounting and detaching. -
In the Box4730F Propeller Pair × 1
Available on backorder
Item Code: G105600G
Last updated: 25-02-2020
Review
Be the first to review “DJI Focus – Handwheel-Inspire 2 Remote Controller CAN Bus Cable (30CM)”
Item Code: G105600G
Last updated: 5-02-2020
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series
Item Code: G105600G
Last updated: 27-02-2020
Remote controller lanyard holder for DJI Mavic.
Features:
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G105600G
Last updated: 27-02-2020
Features:
- Concurrent dual band 2.4 & 5 GHz
- Quick Attach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
- No modification to the drone itself
- Design does not contain any removable parts
- Complete solution
item code ;105600-BK
LAST UPDATED ;24-10-2022
- 260 m @ 80% Reflectivity
- 2 cm Range Precision
- 0.1° Angular Accuracy
- Non-Repetitive Scan Pattern
- High Reliability