Raptor XR Designed for DJI Phantom 4 & 4 Adv
![Last Sold](https://dubaishop1.com/modules/5c42244208/assets/images/flame.png)
Item Code: G1056TA
Last updated: 08/06/2023
- Maximize performance
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Ask a Question
Raptor XR Designed for DJI Phantom 4 & 4 Adv
AED 799Ask a Question
Specification
Last DJI Phantom series, Dji Phantom 4 & 4 Advanced are models that allow long continuous enjoyment. It is perfectly capable of flying long distances, however its maximum range may vary depending on the area, especially noisy ones. With its fast maximum speed of 65 km/h and flight time of 30 minutes, Phantom 4 is an incredible drone in terms of its capabilities. With ability to record 4k videos, it is a great choice for perfectionists seeking good recordings.
4Hawks antenna for Dji Phantom 4 Advanced model is operating in 2.4GHz with 14 dBi gain. The antenna is not bothering the user since it’s supposed to look like it was a part of a remote controller from the start. Entire construction is 100% UV protected ABS to assure longevity of the equipment. Additionally, parts of the construction are made from, aluminum to make the construction lightweight. Mounting is made of stainless steel for rock solid stability. Mounting the range extender is very easy and doesn’t require professional assistance. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.
Specification
Electrical parameters
Port 2: 2.40 – 2.50 GHz
Port 2: 14 dBi (+/- 1 dBi)
Port 2: < 1.20 (max. < 1.40)
Port 2: 35°/45°
Port 2: Vertical
Port 2: 50 Ω
Mechanical parameters
Mounting: Stainless steel + paint
11.50 x 7.16 x 0.83 inch
Port 2: RP-SMA female
Related Products
Item Code: G1056TA
Last updated: 06/06/2023
Brand new Flat Ribbon Gimbal Cable (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 06/06/2023
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series*
Item Code: G1056TA
Last updated: 06/06/2023
Dimensions: 860 mm × 560 mm × 455 mm
Net Weight: 10.5 kg
Max Internal Load: 18 kg
Compatible Batteries: TB47S / TB48S / TB47D / TB48D Intelligent Flight Battery × 18 pcs
Compatible Chargers: MC6S600 (DJI Hex Charger) × 2 pcs
Operating Temperature: -10° to 50 ° C
Last updated: 06-06-2023
Item code: 105600BK
- 260 m @ 80% Reflectivity
- 2 cm Range Precision
- 0.1° Angular Accuracy
- Non-Repetitive Scan Pattern
- High Reliability
Last updated:06/06/2023
Item Code: G1056T
Improve the Inspire 2’s high-altitude (2500-5000m) performance.
Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller.
The Quick Release Propellers (for high-altitude operations) improve the performance of the Inspire 2 at high-altitude (2500-5000m) locations.
A larger propeller pitch increases the aircraft’s propulsion force at altitudes with thinner air.
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G105600G
Last updated: 25-02-2020
Review
Be the first to review “DJI Focus – Handwheel-Inspire 2 Remote Controller CAN Bus Cable (30CM)”
Item Code: G1056TA
Last updated: 06/06/2023
Remote controller lanyard holder for DJI Mavic.
Available on backorder
Item Code: G1056TA
Last updated: 07/06/2023
Apply with inspire 1 Remoter controller. Its ergonomic design ease the pressure to the cervical vertebra.
Item Code: G1056TA
Last updated: 06/06/2023
Admission package for the battery.
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Available on backorder
Item Code: G1056TA
Last updated: 06/06/2023
DJI TB55 Battery (single battery)