DJI Matrice 200 GPS Kit Part 9
4 sold in last 12 hoursItem Code: G1056HK
Last updated: 08/06/2023
- Compatible with Matrice 210 & Matrice 210 RTK
- Replacement part for Matrice 210 & Matrice 210 RTK
- For use with upward gimbal mount
Specification:
The Matrice 200 Series GPS Kit (Part No.9) replacement part.
Brand
DJI
Related Products
Item Code: G1056TA
Last updated: 06/06/2023
- Maximize performance
- Concurrent dual band 2.4 & 5GHz
- No modification to the drone itself
- Long range extension without external boosters
- Design does not contain any removable parts
- Complete solution
Item Code: G1056TA
Last updated: 08/06/2023
- QuickAttach mounting system
- Adjustable tilt of the range extender
- Dedicated pigtails
- No drilling required
Item Code: G105600G
Last updated: 25-02-2020
Review
Be the first to review “DJI Focus – Handwheel-Inspire 2 Remote Controller CAN Bus Cable (30CM)”
Item Code: G1056TA
Last updated:08/06/2023
- Concurrent dual band 2.4 & 5 GHz
- Quick Attach mounting system
- Adjustable tilt of the range extender
Item Code: G1056TA
Last updated: 06/06/2023
- Just connect your tablet with DJI Go App to DJI Mavic and start shooting as a Pro!
Last updated:06/06/2023
Item Code: G1056T
Improve the Inspire 2’s high-altitude (2500-5000m) performance.
Including a pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller.
The Quick Release Propellers (for high-altitude operations) improve the performance of the Inspire 2 at high-altitude (2500-5000m) locations.
A larger propeller pitch increases the aircraft’s propulsion force at altitudes with thinner air.
Item Code: G1056TA
Last updated:06/06/2023
Brand new Gimbal Vibration Absorbing Board (original) for DJI Mavic Pro.
Item Code: G1056TA
Last updated: 06/06/2023
DJI Matrice 200 Part08 Zenmuse XT Gimbal Adapter
The Zenmuse XT Gimbal Adapter is required in order to attach a DJI XT thermal camera to a Matrice 200 series aircraft
*Required to use a Zenmuse XT camera with the 200 series*
Last updated: 06/06/2023
Item Code: G1056TA
Specifically made for the Phantom 4 Pro, this ND filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera’s aperture, exposure time and sensor sensitivity settings.
Put more simply, the ND filter helps avoid overexposed photos.
The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.
The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.
The ND16 filter allows 1/16 of incoming light through, equal to a 4-stop filter.
Item Code: G1056TA
Last updated: 07/06/2023
Apply with inspire 1 Remoter controller. Its ergonomic design ease the pressure to the cervical vertebra.
Item Code: G1056TA
Last updated: 06/06/2023
Charge four batteries together.The Mavic Intelligent Flight Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.
The advanced Charging Hub optimizes charging to improve efficiency. The advanced version charges fully in one hour less than the standard version. When used together with a Phantom 4 charger, the charging time is reduced to 2.5 hours.